User's Guide
Table Of Contents
- 1 Introduction
- 2 Installing Arcadia Central Station
- 2.1 Front Panel Connectors, Controls and Indicators
- 2.2 Intercom Touchscreens
- 2.3 Rear Panel Connectors and Indicators
- 2.4 System Powering
- 2.5 Clear-Com Ethernet Cable Recommendations
- 2.6 Stage Announce and Program Feed
- 2.7 Set the Arcadia Central Station IP address
- 2.8 Save and Restore System Configuration
- 2.9 Reset to Default
- 2.10 Example Applications
- 3 Connecting to other systems
- 4 Network Setup
- 5 Core Configuration Manager (CCM) walkthrough
- 6 CCM configuration
- 6.1 Setting up the Arcadia Central Station
- 6.2 Adding IP Transceivers (FS Edge, FS II 1.9, 2.4)
- 6.3 Registering beltpacks
- 6.4 Viewing and adding Channels
- 6.5 Viewing and Adding Members to Groups
- 6.6 Channels or Groups?
- 6.7 Creating and Editing Roles
- 6.8 Set up GPIOs and Logic Events
- 6.9 Monitoring Your System from the CCM
- 7 Security
- 8 Configuring from the Front Panel
- 9 Spare parts
- 10 Terminology/glossary
- 11 Front Panel Menu Reference Tables
- 12 Specifications
- 13 Pinouts
- 14 Regulatory compliance
User Guide | Arcadia Central Station
Note: Default values are shown in bold.
11.1 Audio Settings
Level 1 Level 2 Level 3 Level 4
Audio Headset Headset Limit
8 to -12 dB/Off
Default = 0 dB
Headset detect Enabled/Disabled
HS Mic Type Electret/Dynamic
Sidetone Gain
8 to -15 dB
Default = -12
Sidetone Control
Tracking/Non-
Tracking/Disabled
11.2 Host Settings
Level 1 Level 2 Level 3 Level 4
Host Settings Host name Edit
Press controller 4 to
open a touchscreen
keyboard.
Display Screen Brightness
High/
Medium/Low/Very
Low
Screen Dimming
1 to 15 minutes
Default = 2 minutes
11.3 2 W Audio (A/B) (C/D)
Level 1 Level 2 Level 3 Level 4
2W Audio (A / B) Interface
Power
detected
Yes/No
Power Enabled/Disabled
Mode Clear-Com/RTS
Page 91