User's Guide
Table Of Contents
- 1 Introduction
- 2 Installing Arcadia Central Station
- 2.1 Front Panel Connectors, Controls and Indicators
- 2.2 Intercom Touchscreens
- 2.3 Rear Panel Connectors and Indicators
- 2.4 System Powering
- 2.5 Clear-Com Ethernet Cable Recommendations
- 2.6 Stage Announce and Program Feed
- 2.7 Set the Arcadia Central Station IP address
- 2.8 Save and Restore System Configuration
- 2.9 Reset to Default
- 2.10 Example Applications
- 3 Connecting to other systems
- 4 Network Setup
- 5 Core Configuration Manager (CCM) walkthrough
- 6 CCM configuration
- 6.1 Setting up the Arcadia Central Station
- 6.2 Adding IP Transceivers (FS Edge, FS II 1.9, 2.4)
- 6.3 Registering beltpacks
- 6.4 Viewing and adding Channels
- 6.5 Viewing and Adding Members to Groups
- 6.6 Channels or Groups?
- 6.7 Creating and Editing Roles
- 6.8 Set up GPIOs and Logic Events
- 6.9 Monitoring Your System from the CCM
- 7 Security
- 8 Configuring from the Front Panel
- 9 Spare parts
- 10 Terminology/glossary
- 11 Front Panel Menu Reference Tables
- 12 Specifications
- 13 Pinouts
- 14 Regulatory compliance
User Guide | Arcadia Central Station
Specification Value
l XLR-3M, transformer isolated, line-level output
Dedicated PGM and SA talk keys are situated in the second menu
level of the left menu touchscreen.
Radio frequency (RF)
sync
Rear RF input and output sync connectors
Power
The Arcadia Central Station has two power supplies, one internal
and one external, which can be used together to provide power
redundancy.
l AC mains input. IEC C14 connector. Input 100-240V AC, 50 –
60 Hz, 160W Max
l DC low voltage input. Input 12V DC, 12A Max
Power supply
External power supply with sleeve-locking connector (provided, part
no. 453G020-1).
l Input 100 - 240V AC, 50 - 60 Hz, 2.2A Max
l Output 12V DC +/- 5%, 12.5A
Front panel headset 4-pin male connector. Automatic mic detect.
4 x programmable
front panel keysets
l 128 x 64 OLED
l Talk and Call keys situated within the front panel touchscreens
l Listen key on rotary encoder for level control
Front panel buttons
l Headset mic ON/OFF
l Configuration Menu
SA, All Talk and RMK buttons are situated in menu level 2 on the
left touchscreen.
Front panel rotary
encoders
4 Program input level control (also used as a listen key and for
navigation through the menu system).
Dimensions 1 RU: 44 x 442 x 250 mm (1.75 x 17.4 x 9.8 inches)
Weight Approx 2.3 kg (5 lb)
Page 97