User's Manual

User Guide | FreeSpeak II™
Page 101
3) Use either rotary control to select the dim level between Off and 120
seconds (35 second default).
Note: Setting the display off timeout to Off disables the timeout function.
4) To confirm the selection and exit the menu screen, press the Menu
Select key (D).
8.6 Configuring the beltpack alarm options
You can configure the following alarm options:
 Low battery alarm
 Low battery alarm threshold
 Out of range alarm
 Call alert mode
Note: See 7.2.3 Beltpack headset tones/alerts for a description of tones.
8.6.1 Setting the low battery alarm
Use this setting to determine how the beltpack behaves when battery power is
low. You can set the following types of alarm:
 Audio warning
 Vibrate
 Audio warning and vibrate
 Off
1) To enter the beltpack menu, press and hold the Menu key.
2) Use the rotary and Menu Select keys to select Settings > Alarm
Options > Alarm Mode.
3) Use either rotary control to select between:
 Vibrate & Audio (default)
 Vibrate Only
 Audio Only
 Off
4) To confirm the selection and exit the menu screen, press the Menu
Select key (D).