User's Manual

User Guide | FreeSpeak II™

Page 104

1) To enter the beltpack menu, press and hold the Menu key.

2) Use the rotary and Menu Select keys to select Settings > Admin

Options. You will be prompted to enter a four digit code. The default code

is 4632.

3) Select Enable Pair Mode.

4) Use either rotary control to select between:

 Disable

 Enable

5) To confirm the selection and exit the menu screen, press the Menu

Select key (D).

8.8.2 Setting full menu access

Use this setting to override the menu access for the beltpack role. The following

menu access levels apply:

 None

 Basic

 Normal

 Advanced

If this setting is not enabled, the menu access is set in the EHX software to one of

the above four levels. When it is enabled, the beltpack has full menu access.

Note: If you change this setting, it will apply until the beltpack role changes, or the

beltpack is power cycled.