User's Manual

User Guide | FreeSpeak II™
Page 106
2) Use the rotary and Menu Select keys to select Information.
You can read the following information:
Item Value
Beltpack role Role name
SW (software) Version number
Beltpack. ID (beltpack identity) ID number
RFP (Remote Fixed Part –
antenna/receiver)
ID number
Regional (radio frequency area) Radio frequency region.
Battery Level Percentage charge, hours of use
Table 8-1 Beltpack information
8.11 Setting display mode
You can select between two display modes: Intercom mode and Partyline mode.
Note: You can only access this option if you have advanced menu access.
1) To enter the beltpack menu, press and hold the Menu key.
2) Use the rotary and Menu Select keys to select Display Mode.
3) Use either rotary control to select between:
 Intercom mode
 Partyline mode
8.12 Setting system connect
Use this option to connect to an antenna.
1) To enter the beltpack menu, press and hold the Menu key.
2) Use the rotary and Menu Select keys to select System Connect.
A list of available systems appears on the beltpack screen.
3) Use the rotary control to select a system.