User's Manual

User Guide | FreeSpeak II™
Page 137
 RTS - selects RTS compatibility with termination enabled.
 OFF - termination disabled on partyline port.
The selection affects the gain, termination and call signaling used when
communicating with this port.
Figure 10-12 Partyline Port Type Menu
10.5.4 Selecting a communication path for the port
For headset, partyline, 4-wire ports and IFBs, you can select an audio path to
determine the destination for the port. To do so:
1) From the Cross Point Assignment left list, select the audio destination for
the port.
For a front panel headset port, you can specify the port which is called
when the Talk button for that port is pushed.
For a partyline or 4-wire port, it causes a permanent talk path to be
created from the port to this destination.
For an IFB it creates an IFB from the port to the destination.