User's Manual

User Guide | FreeSpeak II™
Page 57
labels. At first both upper and lower labels will have the same generic
designations.
 To get to the second, third and fourth pages of beltpacks, scroll all the
way to the right of the screen, and then continue to scroll. The second,
third and fourth pages will be displayed showing beltpacks 6 - 10, 11 - 15
and 16 - 20 (BPK06 - BPK10, BPK11 - BPK15, BPK16 - BPK20).
2) Scroll to and select the desired beltpack.
The next menu that appears gives the options for programming the selected
beltpack, as shown in Figure 6-3 First beltpack programming options menu.
Figure 6-3 First beltpack programming options menu
3) Scroll all the way to the right of the screen and continue to scroll. The
second beltpack programming options menu will be displayed.
Figure 6-4 Second beltpack programming menu
4) Scroll to and select LABEL from the menu.
A menu to edit the selected beltpack label appears, as shown in Figure 6-5 editing
a beltpack label. The current 5-character label appears, just under its generic
name.
Figure 6-5 editing a beltpack label
5) Scroll to and select the alphanumeric character to be changed. A box
appears around the character.
6) Rotate the setup/enter encoder. As the encoder is rotated the entire range
of available characters appears, starting with upper-case characters,