User's Manual

User Guide | FreeSpeak II™
Page 85
7.2.2 Beltpack display
The following table lists the beltpack display icons and indicators.
Beltpack display icons and indicators
Name Icon Description
Key label A descriptive name for the channel. The
maximum length is 10 characters (5 characters
for the Base station system).
Role name A descriptive name for the beltpack role.
Channel
listen
volume level
The volume of the channel audio.
Signal
strength
Bars that indicate the strength of the signal from
the Main Station.
Battery
level
Indicates the battery time remaining.
Table 7-3 Beltpack display icons and indicators
7.2.3 Beltpack headset tones/alerts
Note: To change call signal, low battery or out-of-range alerts go to Menu (press and
hold) -> Settings -> Alarm options on your beltpack. Choose from Vibrate &
audio/Vibrate only/Audio only/Off.
Beltpack headset tones/alerts
Event Tone
Call signal Mid to high beep, as long as call is
active
Mid on 200ms, mid off 0ms, high on
200ms, high off 400ms. Repeat if key
held.
Low battery High beep, long then short.
High, on 400ms, off 100ms, on 100ms.
Repeats intermittently.
Out-of-range High beep, long then short (as above).
Repeats as long as beltpack is out of
range.