User's Manual

User Guide | FreeSpeak II™
Page 97
1) To enter the beltpack menu, press and hold the Menu key.
2) Turn either rotary control clockwise to highlight Vol Operation, and press
the Menu Select key (D).
3) Use either rotary control to select between:
 Talk Key
 Master
4) To confirm the selection and exit the menu screen, press the Menu
Select key.
8.3 Configuring the beltpack headset
You can configure the following headset settings:
 Headset autodetect
 Headset sidetone level
 Headset limiter
The menus that appear depend on the menu access level. See 8.8.2 Setting full
menu access.
8.3.1 Setting headset autodetect
Use this setting to allow the beltpack to automatically detect when you plug in a
headset, and route the audio to the headset.
Note: To use this feature, first set Mic Type to Auto. See 8.4.1 Setting the
microphone type.
1) To enter the beltpack menu, press and hold the Menu key.
2) Use the rotary and Menu Select keys to select Settings > Headset
Options > Auto Detect.
3) Use either rotary control to select between:
 On
 Off
4) To confirm the selection and exit the menu screen, press the Menu
Select key (D).