User Manual

Beltpac tone settings:

Select a beltpac, then select the events for which

you would like tones to sound in that beltpac

user’s headset.

Beltpac user identifier settings:

To assign identification to a beltpac, such as a

user’s name, select a beltpac then use the arrow

buttons and selector knob to assign a name and

number to each beltpac.

NOTE: Each beltpac must have a different

number

, and each assigned number must be

programmed into the base, or the base will not

recognize the beltpac.

Names can also be used if desired.

Copy Beltpac Settings:

To copy settings from one beltpac to all others for

all settings except ID numbers, names and

frequencies, select Copy and press the ENTER

button.

Upload Beltpac Settings:

To upload all beltpac settings from the base

station to a beltpac, select a beltpac then select the

upload box and press the ENTER button.

NOTE: A beltpac must be connected to the

BELTPAC CONFIG connector on the front panel

of the base station to enable uploading of beltpac

settings.