User's Manual

3
For ion IQ
™
Audio Systems, register each COMMUNICATOR
®
as follows:
•
On the ion IQ base station STATUS display, press the Menu button.
• On the MAIN MENU display, press the Register button.
• The REGISTRATION display indicates the number of headsets already registered and how many more
can be registered.
⎯ If you would like to unregister some of your headsets, turn OFF all the headsets you want to
unregister and turn ON all the headsets you want to remain registered, and then press the Clear
Inactive button on the REGISTRATION display to unregister all the headsets that are not turned on,
and press the Clear Inactive button on the CLEAR INACTIVE REGISTRATIONS display.
⎯ If you would like to unregister all of your headsets, press the Clear All button on the REGISTRATION
display and then press the Clear All button on the CLEAR ALL REGISTRATIONS display.
CAUTION: When clearing all headsets, the base station will shut down and re-start.
• To register headsets, press the Register Headset button on the REGISTRATION display.
• On the TO REGISTER HEADSETS display, follow the instructions in the box.
• To register only one headset, press the Register Single button.
To register more than one headset, press the Register Multi button.
When each registration is successfully completed:
• The ID number assigned to this Communicator will be shown.
ID numbers are assigned sequentially as 0 thru 9, A, b, C, d and E.
• The power light on the Communicator will remain on steady green.
• When you have finished registering Communicators, press the Back button to exit the registration mode.
You can repeat pressing the Back button until you return to the MAIN MENU or STATUS display.