User Manual

ELECTRONICS
PRODUCT SPECIFICATIONS SHEET
CAT NO.
PRODUCT NAME
10-3702 Q Dope
10-3704
10-3709
DESCRIPTION:
A fast drying, medium bodied solvent type cement. It forms high strength bonds in joining styrene
materials. It is suitable for a wide variety of applications. It may be used on both large and small
assemblies, large displays, signs, lighting fixtures, housewares, lenses, large and small containers, toys,
electrical or electronic assemblies, etc.
TYPICAL PROPERTIES:
Color Milky White
Flashpoint 45°F
Specific Gravity 0.91
Drying Time 2 hrs.
INSTRUCTIONS:
1. Assemble while parts are still wet. If cement is applied to one surface, let the two surfaces be in gentle
contact for a few seconds to allow the cement to soften the dry surface.
2. Then press parts together in firm contact. If both parts have been coated, they may be brought firmly
together immediately.
CURE:
Cure is effected by dissipation of the solvent from the cement and surrounding parts soften by it. Initial
bond will usually take place within minutes and may be of sufficient strength for handling. Bond strength
will be considerable in a few hours and will reach high strength in 24 to 48 hours. Thereafter, strength will
continue to increase gradually for some weeks.
SHELF LIFE,CLOSED CONTAINERS:
36 months
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
[phone]