Owner manual

ManualsBrandsHMC Electronics ManualsPower ToolsESL300 Delta Regis Electric Screwdriver, Direct Plug-in

120/220VAC Direct Plug-In Screwdrivers

Operation Manual

CAUTION - Please read, understand, and follow all

operating and safety instructions in this manual before

using the Electric Screwdrivers.

Do not attempt to modify the tools. Repairs must only

be performed by qualied repair personnel.

Doc. AC_DirectPlugIn_Screwdriver_Man_R1

Applies to the following Delta Regis products:

Lever Start Screwdriver Models: ESL300, ESL301, ESL302, ESL383E, 384E, 385E, 383FE,

ESL384FE, ESL500(LT), ESL501, ESL502, ESL503

Push-to-start Screwdriver Models: ESL300P, ESL301P, ESL302P, ESL383PE, 384PE, 385PE,

ESL383PFE, 384PFE

120/220V120/220V

C DC D

irir

ecec

t Plug-It Plug-I

O O

erer

tion Mtion M

ESL300, ESL301, ESL302, ESL383E, 384E, 385E, 383FE,

ESL384FE, ESL500(LT), ESL501, ESL502, ESL503

ESL300P, ESL301P, ESL302P, ESL383PE, 384PE, 385PE,

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

(800) 482-4440

Summary of content (6 pages)

PAGE 1
20/220VAC 120/220VA 120/220V AC Dir Direct D irec ectt Plug-In Plug-I Screwdrivers Op O Operation p er era a tion M Manual Applies to the following Delta Regis products: Lever Start Screwdriver Models: Push-to-start Screwdriver Models: ESL300, ESL301, ESL302, ESL383E, 384E, 385E, 383FE, ESL384FE, ESL500(LT), ESL501, ESL502, ESL503 ESL300P, ESL301P, ESL302P, ESL383PE, 384PE, 385PE, ESL383PFE, 384PFE CAUTION - Please read, understand, and follow all operating and safety instructions in this manual before
PAGE 2
120/220VAC Direct Plug-In Operation Manual Important - Safety and Use Warning - Read all instructions. Failure to understand and follow proper guidelines, safety requirements, and operating instructions may result in malfunction, component damage, property damage, shock hazard, fire hazard, injury or death. The term ‘power tool’ refers to a mains operated (corded) or battery operated (cordless) electric screwdriver. Save this manual for future reference. Work Area 1. Keep your work area clean and well lit.
PAGE 3
120/220VAC Direct Plug-In Operation Manual Tool Use and Care 1. Use clamps or other practical means to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. 2. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 3. Do not use the tool if the switch does not turn it on or off.
PAGE 4
120/220VAC Direct Plug-In Operation Manual Getting Started Unpack the screwdriver from its box and confirm that all items have been received in good condition. The screwdriver 600 Series is shipped with the appropriate grounded power cord for connection to the AC supply receptacle. Select a suitable location for plugging in the screwdriver. Ensure that the location allows for the required range of motion of the screwdriver without stressing the power cable.
PAGE 5
120/220VAC Direct Plug-In Operation Manual Specifications: 120V AC Electric Screwdrivers Shut-off Clutch Input Voltage: 110-120VAC, 50/60Hz AC Plug Type: 3 prong, grounded Bit Holder: 1/4” hex quick change Start Type Range In.Lbs Range Nm Speed (RPM) AC Current (no load) Length in / mm Diameter in / mm Weight lbs / g ESL300 Lever 1.8 - 10.4 0.2 - 1.18 1000 0.3 A 9.5 / 242 1.5 / 38 1.2 / 550 ESL300P Push 1.8 - 10.4 0.2 - 1.18 1000 0.3 A 9.5 / 242 1.5 / 38 1.
PAGE 6
120/220VAC Direct Plug-In Operation Manual Parts and Accessories If you require parts or accessories for your Delta Regis product, please refer to our website or contact us for further information. Service 1. 2. 3. 4. 5. 6. 7. 8. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts.