How-To Guide

Your phone already has a SIM card installed.
Step 1. Swap the SIM card and insert the memory card
Optional:
1. Your phone comes with the SIM card preinstalled, but if you want
to swap the SIM, open the SIM and memory card tray: push the tray
opener pin in the tray hole and slide the tray out.
2. Put the nano-SIM card on the tray with the contact area face down.
3. Put the memory card in the memory card slot with the gold contacts
face down.
4. Slide the tray back in.
NOTE: The microSD card is sold separately.
Setting up your phone
Setting up your phone
IMPORTANT: Do not remove the memory card when an app is using it.
Doing so may damage the memory card and the device and corrupt data
stored on the card.
Use only compatible memory cards approved for use with this device.
Incompatible cards may damage the card and the device and corrupt data
stored on the card.
Step 2. Charge the phone
Before turning on your phone, charge it fully.
1. Insert the small end of the USB cable into the phone.
2. Insert the larger end into the charger and plug it into an outlet.
WARNING: Only use approved chargers with your device. Incompatible
chargers or tampering with the charger port could damage your device
and void the warranty.
Step 3. Turning your phone on/off
To switch on your phone, press and hold the Power/Lock button until the
phone vibrates.
Setting up your phone