USER GUIDE AND WARRANTY INFORMATION HX-P450
HEY. HAVE WE SEEN YOU HERE BEFORE? PACKAGE CONTENTS Register your speaker at www.hmdxaudio.com. Information about where you bought it and how you’re using it is like gold for the people who make these speakers. Do them a solid, will ya? Por manual de instrucciones e información de garantía en español visítenos en www.hmdxaudio. com. User Manual There are lots of cool HMDX speakers. Check them all out at www.hmdxaudio.com. Setup is pretty easy, but we put a manual together just in case you need it.
JUST CHARGE IT Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: You can charge it using your computer or a wall outlet. 1.The cord that came with the speaker — the one with the USB on one end and the Micro USB on the other — is made to work with your computer. 2.If you want to use the wall outlet, you’ll need to pick up a power cord with a Micro USB the next time you’re at the store or use any USB AC adaptor, including the one for your cell.
CONTROL YOUR DESTINY...OR AT LEAST YOUR SPEAKER 1. Push it to play, push it again to pause. 2. Previous or next track. 3. Turn the music up or down. (Wait, why do you need to turn it down?) 5 4. This is the power button, press and hold for 5 seconds to power on. 5. This light lets you know when Bluetooth is paired with your speaker. 1 6. The power cord goes here. 7. This light lets you know when your device is charging. 8. Here’s where you use a mini jack cord to hook it up old-school.
BLUETOOTH® CONNECTION: IT’S A SETUP Like any amazing couple, this one starts with a connection—one between your device and the speaker’s Bluetooth. Here’s how it works: 1. We know you’re probably going to think “derp” with this one, but we have to say it: Make sure the smartphone, tablet or computer you want to hook up to the speaker has Bluetooth. (There. We got that out of the way.) 2. Turn on the speaker (press and hold for 5 seconds) and look for the little blinking light. 3.
ALLOW US TO SHED SOME LIGHT CHARGE What It Looks Like What it Means Flashing RED Low Battery Solid RED Charging NO LIGHT (when plugged in) Ready to Party Quick BLUE Flash Looking for Bluetooth Slow BLUE Flash Connected RED Hooking up Old School with a co rd HOOKING UP OLD SCHOOL AUDIO, JACK 1. Plug one end of the cord into the speaker and the other into the headphone jack on your device. 2. Turn on the speaker. 3. Hit PLAY on your device and crank it up—or down if you’re lame.
HELLO? SPEAKERPHONE? YES! COMING CLEAN When friends call asking to join the party–and you know they will–answer the phone without disconnecting from your HMDX Blast. Yes, that’s right. Your speaker is a speakerphone too. How amazing is that? Here’s how it works: 1. Make sure your phone and the speaker are connected through Bluetooth. 2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Blast. 3.
STUFF THE GOVERNMENT MAKES US SAY FCC Disclaimer: Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
ONE YEAR LIMITED WARRANTY STUFF OUR LAWYERS MAKE US SAY For detailed Warranty Instructions and Information visit: http:// www.hmdxaudio.com/customer-support/ warranty-1yr To obtain warranty service on your HMDX product, contact a Consumer Relations Representative by telephone at 1-800-753-3000 or email cservice@ hmdxaudio.com for assistance. Please make sure to have the model number of the product available. Representatives are available 8:30am - 7:00pm EST Monday-Friday.
A MESSAGE FROM THE ENVIRONMENT • Never operate this product if it has a damaged cord, plug, cable or housing. • Turn off product when not in use. • Keep away from heated surfaces. • Only set on dry surfaces. Do not place on surface wet from water or cleaning solvents. SAVE THESE INSTRUCTIONS CAUTION: Please read all instructions carefully before operating. • Never leave the product unattended, especially if children are present. • Never cover the product when it is in operation.
©2014 HMDX. ALL RIGHTS RESERVED.