Manual

BLUETOOTH

CONNECTION: IT’S A SETUP

Like any amazing couple, this one starts with a

connection—one between your device and the

speaker’s Bluetooth.

Here’s how it works:

1. We know you’re probably going to think “derp”

with this one, but we have to say it: Make sure the

smartphone, tablet or computer you want to hook

up to the speaker has Bluetooth. (There. We got that

out of the way.)

2. Turn on the speaker (press and hold for 5 seconds)

and look for the little blinking light.

3. Do whatever your device needs you to do on its end.

(We don’t know what you’re using. We’re not spies.)

4. Look for HMDX Blast in your device’s Bluetooth list

or click YES—whatever pops up on your device—

and BAM! you’re connected.

5. Now hit PLAY on your speaker and crank it up—or

down if you’re lame.

You’re probably only going to have to do this once,

unless your device goes through a major I-just-dropped-

it-in-the-pool kind of reboot. The device and Bluetooth

will ﬁnd each other every time just as long as the

speaker is set to Bluetooth and your device’s Bluetooth

is, you know—on.

If you’re connecting to a computer, you may have

some extra steps on that end. You’ll have to get that

information from the computer company.

Depending on your device you may be prompted to

enter a pairing code. If prompted enter “0000” as the

code.

Press and hold the PLAY/PAUSE button for 5 seconds

to activate pairing mode.

Note: If you turn on your Blast but haven’t started the

party yet, it will automatically power off after 2 minutes

of inactivity.