User guide

Controls

1. Charging Port

2. Bluetooth

Indicator

3. Volume Down

4. Reverse Track

5. Play/Pause

6. Volume Up

7. Forward Track

8. Battery Status Indicator

9. Power Button

Pairing the Jam Splash Speaker

To listen to your music over the Bluetooth

wireless connection, you need to

pair your device with the Jam Splash:

1. Make sure your device has Bluetooth

capability.

2. Press and hold power button for 5 seconds; indicator will begin to flash.

3. Follow the instructions of your device to pair the unit.

4. Pair your device by selecting JAM Splash from your Bluetooth

listings on

your device or selecting YES.

5. Press play on your device and use controls on the unit to adjust

desired volume.

NOTE:

• Once you have successfully paired your device, you may not need to repeat

the above steps.

• When pairing with a computer, please consult your computer manufacturer

for Bluetooth

pairing instructions and/or the latest Bluetooth

Drivers.

• Keep all non-water-resistant devices (phones, mp3 players, etc.) in a dry

place where they will not come in contact with water.

• A pairing code is not required.