Manualshelf

Data Sheet

ManualsBrandsHN Power ManualsFixed Voltage Mains AdaptersBench PSU (adjustable voltage) 9 V DC, 12 V DC, 13.5 V DC, 15 V DC, 18 V DC, 20 V DC, 24 V DC 3300
1234
Switching power supply
GB
Please read the manual carefully and note the safety advice.
User Manual:
Unpack the product and check the contents inside the package.
If available, please put the AC input clip for your region on the adapter body or connect the AC cord to the adapter.
Connect the adapter to the wall socket. The operating LED (if available) will turn on when then adapter is ready to use.
Connect the cable to the device. For adapters with USB port fi rst attach USB cable to the powersupply, then connect the device.
Please choose a fi tting DC connector (fi g.1), take care of the required polarity (fi g.2) and select the output voltage (fi g.3)
No commitment for any damage at misuse.
In case you need technical support, please contact our support-team by e-mail under info@hnec.de
Safety advice:
• Do not pull the cable.
• Do not open the device, there are no serviceable parts inside.
• Do not expose the device to water and protect it against humidity.
• Do not use brute force when connecting the adapter.
Note on environmental protection:
After the implementation of the European Directive 2012/19/EC in the national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and
electronic devices and batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale.
Details to this are defi ned by the national law of the respective country.
This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing
the materials or other forms of utilising old devices, you are making an important contribution to protecting our environment.
We hereby declare, that this device carries the CE mark in accordance with the regulations and standards. It conforms with the
fundamental requirements of the EMC directive 2014/30/EC as well as the Low Voltage Directive 2014/35/EC.
You can fi nd the complete declaration of conformity and a detailed datasheet under www.hnec.de.
(fi g.1)
(fi g.1)(fi g.1)
HN Electronic Components GmbH & Co. KG • Birkenweiherstrasse 16 • 63505 Langenselbold • Germany
Effi ciency (EU) 2019/1782
• Keep the device away from children.
• Disconnect electronic devices from the power when not using for longer time.
• The power outlet where the adapter is used must be easily accessible.
• Do not use the device when it has visible defects.