User manual RAX1801 Smart Wi-Fi Router Tech Support :Support@hnknet.com 17.P6.
1.Appearance 3.Connect the Router 1. Before you start, please turn off your modem if any, and remove the backup battery if it has one. 2. Connect the modem to the router’s WAN port with an Ethernet cable. 3. Turn on the modem, and then wait about 2 minutes for it to restart. 4. Connect the power adapter to the router. 5. Verify the power LED on the top panel is solid on (green) . 6. Connect your computer or smartphone to the wifi named HNK-RAX1801 or HNK-RAX1801-5Ghz.
4.Wizard Page 4.2.2 PPPoE Settings 4.1 Wizard Page Browser Type 192.168.0.1 , automatically jump to the configuration wizard pageδNO password in defaultε Figure 4-1 Figure 4-3 4.2 WAN Connection Settings There are several connection types to choose: Static IP, DHCP and PPPoE. If you are unsure of your connection method, please contact your Internet Service Provider. Note: If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers. 4.2.
4.2.3 Static IP Settings 4.3 Wireless SSID and Password Settings After configuring the static IP access method, please click “Next” to complete the wireless SSID configuration and wireless password settings. Figure 4-5 Figure 4-7 4.4 Admin Password Settings After configuring the wifi, click “Next” to set the user (Admin) password, and then click “Next” to save the configuration.
6.Home Page Home page information is displayed. Figure 4-9 5.Web Management Landing Page 5.1 Management Page Login After completing the configuration wizard, please enter 192.168.0.1 in the browser to log in to the router management page. Admin PasswordφThe Device admin Password you set on Wizard Page. Figure 6-0 6.1 Internet Information Display Page Internet connection status and connection information.
6.2 WiFi Information Display Page 6.2.1 Router Mode Home>>RAX1801 Display Extender IPv4 mac address and wireless SSID. 6.3 Connected Clients Information Display Page Connected Clients information display page: It shows Connected Clients information. Figure 6-4 Figure 6-2 6.2.2 Repeater Mode Display the Extender IPv4 mac address and the uplink router’s wireless SSID.
7.Function Configuration 7.1 WIFI Setting Use this section to configure the wireless settings for your Router. Please note that settings made in this section may also need to be synchronized on your Wireless Client. Figure 7-1 7.1.1 WIFI 2.4G Setting and 5G Setting Configure the router 2.4G or 5G WIFI SSID and password. Figure 7-2 Click on Settings >> Wireless. Turn off the status button of Smart Connect. Then you can configure the router 2.4G or 5G WIFI SSID and password.Click on Settings >> Wireless.
7.1.2 Smart Connect After the smart connection is closed, the extender 2.4G WIFI and the 5G WIFI can be searched on the terminal wireless device respectively, and there are two wireless bands to be displayed on the page. Figure 7-5 When Smart Connect feature is on, your wireless device can find one wireless SSID, and it will automatically match the 2.4G or 5G band WIFI according to the connection signal strength. 7.1.3 Guest Zone This feature lets you enable and configure a Wi-Fi Guest Zone.
7.2.1 IPV4 Settings Use this section to configure your Internet Connection type. There are several connection types to choose: Static IP, DHCP, PPPoE. If you are unsure of your connection method, please contact your Internet service provider. Note: If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers. 7.2.3 Host Name Set Internet connection type as dhcp. Figure 7-11 Advanced settings. Figure 7-9 7.2.
7.3 Network Function Configuration Use this section to configure the network settings for your devices. You can enter a name for your device in the management link field and use the link to access web UI in a web browser. Recommend changing the management link if there are more than one device within the network. 7.3.3 Network Advanced Settings Set LAN advanced settings, UPnP function. Figure 7-17 7.4 ModeSet Configuration Settings>>ModeSet You can set it to be a router or a repeater mode.
Select the router 2.4G or 5G WIFI SSID and enter the signal extension password. Figure 7-20 Click the scan function after entering the page to scan the uplink router wireless. Figure 7-22 8.Features Setting 8.1 QOS Click on Home >> Connected Clients. Connected clients can be assigned Internet access priority. Create a new QOS rule in connected clients list.
After the above setting, click on Features >> QoS Engine. 8.2.1 Website Filter The website filter feature allows you to set rules that you can restrict access to a specified web address (URL) or block specified keywords in the URL. You can use Website Filter to restrict access to potentially harmful and inappropriate websites. Figure 8-2 You can see the connected clients in the QoS rules list. Figure 8-5 8.2.
Create a new rule. Open Firewall Status>>Save>>IPv4 Rules>> Add Rule Figure 8-7 8.2.3 IPv6 Rules The IPv6 will also be supported by your router's built-in firewall. Some applications or clients may require special adjustments for better performance or extra protection. 8.2.4 Remote Management HTTP Remote Management 8.2.5 WAN Ping Figure 8-11 Figure 8-8 Create a new rule. Open Firewall Status>>Save>>IPv6 Rules>> Add Rule Figure 8-9 Figure 8-10 8.
8.3.1 Port Forwarding Your router helps to share a single IP address assigned by your ISP among several clients in your home. Port forwarding allows traffic requests from a specified application to be directed to a specified client inside. Figure 8-16 Figure 8-13 Create a new port forwarding rule. Figure 8-14 8.3.2 DMZ Your router's high-performance firewall feature continuously monitors Internet traffic, protecting your network and connected devices from malicious Internet attacks. 8.3.
9. Management Page 9.1 Time and Schedule 9.1.1 Time Your router's internal clock is used for data logging and schedules for features. The date and time can be synchronized with a public time server on the Internet, or set manually. Figure 8-19 8.4 DDNS Dynamic Domain Name Service(DDNS) allows your router to associate an easy-to-remember domain name such as [YourDomainName].com with the regularly changing IP address assigned by your Internet Service provider.
Figure 9-3 9.1.3 Led Time Your router's internal clock is used for data logging and schedules for features. The date and time can be synchronized with a public time server on the Internet, or set manually. Figure 9-5 9.3 Admin Page Settings To set the administrator password, you need to enter the original password for verification; then enter a new administrator password and verify it again. Figure 9-4 9.
9.4 System Page Setup Figure 9-9 Figure 9-7 After modifying the administrator password, the browser will jump to the login page. Enter the administrator password to login 9.4.1 Save Settings to Local Hard Drive Export the configuration file to the local PC for saving, so that you can quickly restore the configuration information.
9.4.2 Load Settings from Local Hard Drive Import the configuration file to the Router to quickly configure the router or restore configuration information. Figure 9-11 9.4.3 Restore to Factory Default Settings Clear all router configuration and restore the router settings to factory default. 9.5 Upgrade Page Settings Figure 9-14 9.5.1 Firmware Information Display Display current firmware version information. Figure 9-12 9.4.4 Reboot the Device Reboot the Router.
9.5.2 Online Firmware Upgrade Settings This page will display your current firmware version. Click on the ‘Check for New Firmware’ button for detecting the latest firmware version. If have, you can upgrade your firmware to the latest version. Otherwise the page will prompt that the firmware is the latest version. Figure 9-16 9.5.3 Local Firmware Upgrade Settings Select the Router's local firmware configure file to upgrade. Figure 9-17 9.
11. Manage the Router via the HNK Router App Method 1: Log in to the App Store or Google Store, search for "HNK Router", download and install the APP. Method 2: Scan the QR code below to download and install the APP.
hour Online After-Sales Service Scan QR Code To Visit https://hnk.afterservice.vip HUIZHOU MTN WEIYE TECHNOLOGY DEVELOPMENT CO.,LTD. Address: NO.2 Huitai Road,Huinan High-tech Industrial Park,Huiao Avenue,Huizhou City,Guangdong Province,China Tech Support :Support@hnknet.com Copyright©2021SHENZHEN ZK TECHNOLOGY CO., LTD. ALL right reserved. The content of this document maybe updated from time to time due to product version upgrades or other reasons.
