User's Manual

7.1.2 Smart Connect
After the smart connection is closed, the extender 2.4G WIFI and the 5G WIFI can
be searched on the terminal wireless device respectively, and there are two wireless bands
to be displayed on the page.
Figure 7-5
When Smart Connect feature is on, your wireless device can find one wireless SSID,
and it will automatically match the 2.4G or 5G band WIFI according to the connection
signal strength.
Figure 7-6
7.1.3 Guest Zone
This feature lets you enable and configure a Wi-Fi Guest Zone. It allows you to create
a separate network for your guests to secure the main network.
Figure 7-7
7.2 Internet Function Configuration
Use this section to configure your Internet Connection type. There are several connec-
tion types to choose: Static IP, DHCP and PPPoE. If you are unsure of your connection
method, please contact your Internet Service Provider.
Note: If using the PPPoE option, you will need to remove or disable any PPPoE client
software on your computers.
Figure 7-8