User's Manual

Figure 10-1
Figure 10-2
Figure 10-3
Figure 10-4
10.Hardware
10.1 LED Indicator
The power light is steady green: The device is on.
The 2.4G light is steady green: 2.4G Wi-Fi band available.
The 5G light is steady green: 5G Wi-Fi band available.
The USB light is steady green: U disk has been inserted.
The Internet light is steady green: WAN port has been connected with network cable.
The Internet light blinks green: WAN port has data transmission.
10.2 WPS Button
1.Press the "WPS" button on the panel to start WPS (limited time is 120 seconds),
then press the router wps function.
2.Open the WPS function on your mobile phone, Wait for the connection between
mobile phone and router.
10.3 RESET Pinhole
When the power is on, sting the router's "Reset" pinhole for 10 seconds to restore
the factory settings.
10.4 SAMBA functions
Locally verified are Kingston (DTSE9 G2) USB drives and SEAGATE hard drives
1. Insert the USB disk into the USB port of the AX1500,Wait for the USB indicator
light to turn green.
2. Press WIN+R on the keyboard to pop up the Quick Run input box, type
\\192.168.0.1, where the IP address is the router address (default route IP: 192.168.0.1),
and click OK.
3. If the following error message is displayed (if no error message is displayed, go
to Step 4), open task Manager, click Programs and Functions, and then click Enable/dis-
able firewall function, select SMB1.0/CIFS File Sharing support, and click OK. After the
application succeeds, restart the PC.