User's Manual

Figure 1-1
Figure 1-2
1.Appearance
Reset
LAN Ports
WAN Port
WPS Button/WiFI Button
Power LED
WPS LED
5G LED
2.4G LED
DC in
Internet LED
LAN LED
2.Packing List
HNK wifi router × 1
Power adapter × 1
Ethernet cable × 1
Quick Installation Guide × 1
User manual × 1
Figure 3-1
Modem
Internet
or
3.Connect the Router
1. Before you start, please turn off your modem if any, and remove the backup battery
if it has one.
2. Connect the modem to the router’s WAN port with an Ethernet cable.
3. Turn on the modem, and then wait about 2 minutes for it to restart.
4. Connect the power adapter to the router.
5. Verify the power LED on the top panel is solid on (green) .
6. Connect your computer or smartphone to the wifi named HNK-RAX1500 or
HNK-RAX1500-5Ghz.
Note: If your internet connection is through an Ethernet cable directly from the wall
instead of through a DSL / Cable /Satellite modem, connect the Ethernet cable to the
router's WAN port, and then connect the power adapter to the router and turn on the router.