Specification Sheet

Quick and easy installation on the
Handler 190 and 210MVP for aluminum
MIG welding.
The SpoolRunner 100 spool gun is great for aluminum MIG
welding. It helps eliminate feeding problems associated with
soft aluminum wire.
MIG weld 16 ga.–3/16 in. (1.6– 4.8 mm) aluminum with
the Handler 190 and 18 ga.–1/4 in. (1.2–6.3 mm) with the
210MVP. Also for use with mild and stainless steel wires.
Rated at 150 amps at 60-percent duty cycle.
Applications
Aluminum fabrication/repair Auto and marine repair
Trailer fabrication/repair Sign manufacturing
Features and Benefits
Includes
Rugged plastic
carrying case
10 ft. (3 m) cable lead
Extra contact tips
(.030–.035 in.)
Extra nozzle
SpoolRunner
™
100
Direct Plug-in Spool Gun for use with Handler
®
190 and 210MVP
250766
February 2018
300796
Quick Specs
Welding Output Rating
150 A at 60% duty cycle
Wire Feed Speed Range
115–715 ipm (4.1–20.4 m/min.)
Wire Type and Diameter Capacity
.023–.035 in. (0.6– 0.9 mm)
aluminum, steel and stainless steel
Easily accessible drive rolls.
Internal adjustment for spool
hub tension.
Spring strain relief protects
power cable from wear.
Threaded nozzle and contact tips.
Trigger lead
Feedhead lead
Enclosed compartment keeps
4 inch (102 mm) rolls of wire
clean. Clear cover allows easy
visibility of wire supply.
Spring-loaded
tension-release arm
for easy wire loading.
Screw-style drive roll tension
adjustment.
Warranted for 1 year
(90 days for
industrial use)
Hobart Welding Products
An ITW Welding Company
Sales: 800-626-9420
Service: 800-332-3281
HobartWelders.com