Product Manual

TABLE OF CONTENTS

SECTION 1 − WELDING HELMET SAFETY PRECAUTIONS − READ BEFORE USING 1.....

1-1. Symbol Usage 1.............................................................

1-2. Arc Welding Hazards 1.......................................................

1-3. Proposition 65 Warnings 3....................................................

1-4. Lens Shade Selection Table 3.................................................

1-5. Principal Safety Standards 3..................................................

SECTION 2 − SPECIFICATIONS 4.....................................................

SECTION 3 − OPERATING INSTRUCTIONS 4..........................................

3-1. Helmet Controls 4...........................................................

3-2. Low Battery Indicator 5.......................................................

3-3. Weld On/Grind On Switch 5...................................................

3-4. Lens Delay Control 6.........................................................

3-5. Variable Shade Control (No. 9 − 13) 6...........................................

3-6. Sensitivity Control 7..........................................................

SECTION 4 − ADJUSTING HEADGEAR 8..............................................

SECTION 5 − REPLACING THE LENS COVERS 9......................................

5-1. Replacing Outside Protective Lens 9............................................

5-2. Replacing Inside Protective Lens 10............................................

5-3. Removing Auto-Darkening Lens Assembly 11....................................

SECTION 6 − REPLACING THE BATTERY 12..........................................

SECTION 7 − INSTALLING OPTIONAL MAGNIFYING LENS 12..........................

SECTION 8 − MAINTENANCE 13.....................................................

SECTION 9 − TROUBLESHOOTING 13................................................

SECTION 10 − PARTS LIST 15.......................................................

SECTION 11 − LIMITED WARRANTY 16...............................................