Corp. Welding System User Manual

OM-355 Page 17
3-6. Process and Material Thickness Guide Label
Guideline For Welding Process And Output For Material
Material Thickness
Material And
22 ga 20 ga 18 ga 16 ga 14 ga 12 ga 11 ga 10 ga 6 ga 2 ga –
0.033 in
0.8 mm
0.036 in
0.9 mm
0.048 in
1.2 mm
0.06 in
1.5 mm
0.07 in
1.8 mm
0.1 in
2.5 mm
0.125 in
3.2 mm
0.14 in
3.6 mm
0.186 in
4.8 mm
0.25 in
6.3 mm
0.25+ in
6.3+ mm
Steel Or Stainless Steel
Aluminum
ELECTRODE
NEGATIVE
AC
DCEN
S-167 338
GTAW
()
Recommended
Weld Output
SMAW
With DCEP
Output
GTAW
Not
Recommended
GTAW
Difficult
SECTION 4 – MAINTENANCE AND TROUBLESHOOTING
4-1. Routine Maintenance
Y Disconnect power before maintaining.
. Maintain more often during severe conditions.
3 Months
Replace unreadable labels. Clean and tighten weld terminals.
Repair or replace cracked weld
cable.
Repair or replace cracked gas
hose.
Replace o-ring in Electrode/Gas
Output receptacle if cracked.
6 Months
Blow out or vacuum inside.
Or