User manual

– 24 –
USING THE FRYER (After Startup)
Models Without Basket Lift Option
1. Load the fry basket(s); do not overfill. See Recommended Basket Capacities section in this
manual.
2. Carefully lower basket(s) into shortening.
3. Press the desired program number to select the product to be timed. Timers
through are
programmed for products. Once the product is selected, select
or button to start timing
of the product on the left or right side of the fryer.
4. When the timer(s) time out, a beeper sounds, REMOVE # is displayed in the window and the timer
number flashes. Press the flashing timer number to silence the beeper.
Models With One Basket Lift Option
1. Load the fry basket(s), do not overfill. See Recommended Basket Capacities section in this
manual.
2. Place the fry basket(s) on the lift arm(s).
3. Press the desired number to start the timer. Timers
through are programmed for products.
Once the product is selected, the timing will start and the single basket lift will lower the product
into the shortening.
4. When the timer(s) time out, a beeper sounds and REMOVE # is displayed in the window. The timer
number flashes and the basket(s) automatically raise. Press the flashing timer number to silence
the beeper.
Models With Two Basket Lift Option
1. Load the fry basket(s); do not overfill. See Recommended Basket Capacities section in this
manual.
2. Place the fry basket(s) on the lift arm.
3. Press the desired program number to select the product to be timed. Timers
through are
programmed for products. Once the product is selected, select
or button to start timing
of the product on the left or right side of the fryer.
4. When the timer(s) time out, a beeper sounds, REMOVE # is displayed in the window and the timer
number flashes. Press the flashing timer number to silence the beeper.
NOTE: To cancel a timer after it has started, press and hold the timer number for 5 seconds.