GAS FRYERS WITH OR WITHOUT FILTER-IN-A-DRAWER Instructions Manual MODELS HGF35 ML-126994 HGF45 ML-126995 HGF65 ML-126996 HGF85 ML-126997 HGFD35 ML-126416 HGFD45 ML-126417 HGFD65 ML-126418 HGFD85 ML-126419 HGFC35 ML-126420 HGFC45 ML-126421 HGFC65 ML-126422 HGFC85 ML-126423 HGFD45 FORM 35614 (February 2004) HGF35F ML-135536 HGF45F ML-135537 HGF65F ML-135538 HGF85F ML-135539 HGD35F ML-126953 HGD45F ML-126956 HGD65F ML-126959 HGD85F ML-126962 HGC35F ML-126954 HGC45F ML-126957 HGC65F ML-126960 HGC85F ML-1

– 15 –
LIGHTING INSTRUCTIONS FOR HGF FRYER WITH MANUAL PILOT IGNITION
NOTE: HGF fryer is only available with manual ignition.
CAUTION: Before turning the burners on, the fry tank must be filled with liquid or melted
shortening.
1. Turn the thermostat OFF. The thermostat is located
behind the door (Fig. 5).
2. Push the gas control valve knob and turn to OFF
(Fig. 6). Wait 5 minutes for unburned gas to vent.
3. Push and turn gas control valve on to the "I" in
PILOT (Fig. 6).
4. While still holding the knob in, light the pilot with a
lit taper. Continue to depress the knob until pilot
remains lit when knob is released.
If the pilot does not remain lit, repeat steps 2
through 4.
5. Depress and turn gas control knob to ON (Fig. 6).
6. If gas supply is interrupted, repeat steps 1 through
5.
TURNING THE HGF FRYER ON
To turn the fryer on, set the thermostat knob to the desired temperature. After the set temperature has
been reached, the gas control shuts off the gas flow to the burners. The pilot remains lit. The burners
will cycle on and off, maintaining the set temperature.
TURNING THE HGF FRYER OFF
1. Turn the thermostat OFF.
2. To keep the pilot lit: Turn the gas control valve knob to "I" in PILOT.
3. To shut off all gas to the system, including the pilot, turn the gas control valve knob to OFF.
EXTENDED SHUTDOWN
1. Turn the main gas shutoff valve off.
2. Turn the thermostat knob to OFF.
3. Turn the gas control valve knob to OFF.
Fig. 5
Fig. 6