INSTRUCTION MANUAL Table of Contents Battery Precautions Safety Precautions Product Features Contents Specifications Limited Warranty App Setup Preparing to Fly Flying Photo/Video Replacement Parts Troubleshooting Maintenance FCC IC Precautions
BATTERY PRECAUTIONS SAFETY PRECAUTIONS The C-me uses a lithium polymer (LiPo) battery. Follow these precautions to ensure safe and trouble-free operation. Follow these safety precautions when operating this or any drone. ● ALWAYS turn off the C-me when it is not in use. ● Before flying, go to www.knowbeforeyoufly.org. ● Do not attempt to use a damaged battery. ● This product contains a LiPo battery that must be recycled or disposed of properly. ● Do not leave the C-me unattended while charging.
PRODUCT FEATURES LIMITED WARRANTY ● Portable: Fits in your pocket ● Simple Operation ● GPS Controlled Stability ● 8 megapixel 1080p camera, same as on the iPhone6 ● One button 360° Panoramic Video ● One Button Take Off/Landing ● Auto Return to Home ● Find Me/Follow Me ● Instant Sharing of Social Media PLEASE DO NOT RETURN YOUR PRODUCT TO THE STORE. This warranty specifically does not cover crash damage, misuse or abuse. Please refer to the warranty package for more details about coverage.
APP Download the latest version of the C-me app from the App Store or Google Play. The C-me can be linked to two phones at the same time. The first phone to link will have directional control. The second phone will only be able to monitor the feed from the camera. Apple and the Apple logo are trademarks of Apple, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android™ and Google Play are trademarks of Google Inc.
Camera A tap on the Camera button captures a still photograph. Push and hold to access the Self-Timer and Burst mode functions for the camera. Please refer to the Photo/Video section for more details. 2. Off with camera flash. This mode turn the LED off except when capturing a photo. 3. Always off. Video Tapping this button Video button starts/stops recording a video. Altitude Slide Bar Slide this control up or down to change the C-me altitude.
Wi-Fi Signal Strength This icon will be white with an “X” when there is no Wi-Fi connection. The icon will be green without the “X” when the app is connected to the C-me. GPS Satellite This icon will show how many satellite signals are being received. The C-me has to receive at least 7 satellite signals and the Indoor Mode setting must be “off” before it will enter Outdoor Mode.
Settings This button opens 1. Instant Share Settings where the social media links are selected 2. Camera settings A. White Balance B. Exposure C. Contrast D. Brightness E. Factory default settings for the camera 3. Device settings A. Change the Wi-Fi network name and password B. Reset all the app settings back to the factory default values 4. Help Menu A. C-me Quick Start Guide B. How to Fly Videos i. Basic Operation (Please review this section before flying the C-me.) ii. Taking Pictures iii.
Follow Me Tapping the C-me button will activate the Follow Me mode. Hover the drone at the height and distance desired before tapping the C-me button. The drone will maintain that altitude and distance from the phone while the pilot is walking at a normal pace. While in the Follow Me Mode, holding the Directional Control all the way to the left or right will make the C-me slowly circle the phone. Keep the phone still while in this mode. Tap the C-me button again to the exit the Find Me/Follow Me Mode.
PREPARING TO FLY Please review the Basic Operation animation in the Settings/Help section of the settings menu if you are not familiar with flying the C-me. Calibration The C-me compass and accelerometers should be calibrated the first time the C-me is flown and: 1. Any time it is flown outside at a different location. 2. Any time the app posts a “Motor is Locked” error. 3. Hard landing or crash.
FLYING TIP: The C-me will perform best when the winds are below 3 mph (5 km/H). Practice indoors before flying outside because the controls are more sensitive when in the Outdoor Mode. To guide the C-me to a new position, use short movements with the Directional Control in the desired direction. Holding the control for more than a second in one direction will usually require movement in the opposite direction because the C-me will have flown past the desired position.
Outdoor Mode: Tapping the landing button will make the drone will climb to 3 meters if it is not already above that alitude, fly back to the launch point and slowly land. If the Directional Controls are used, the drone will stop the RTL. After C-me has moved to the desired position, it will hover. The Self-Timer has 3 second and 10 second timer options. Tap the number to start the timer. If a rapid landing is desired, tap the Emergency Button.
REPLACEMENT PARTS TROUBLESHOOTING PROBLEM: The C-me App will not connect to the drone SOLUTION: (1) Completely close the C-me app. (2) Open the Wi-Fi setting for the phone and select the C-me network if not already connected. (3) Open the C-me app. 1 2 3 5 4 3 PROBLEM: The C-me circles instead of hovering when outside. SOLUTION: The compass on the C-me should be calibrated. Please follow the procedure in the Calibration section of Settings 2 Replacement Parts: 1. Propeller Set Black (4) 2.
MAINTENANCE BATTERY PRECAUTIONS Propeller Installation Be sure to match the letter on the propeller with the letter on the arm. The C-me uses a lithium polymer (LiPo) battery. Follow these precautions to ensure safe and trouble-free operation. Motor/Gear/Bearing Replacement The Motor, Gear, and Bearings can be replaced without removing the arm from the C-me. When installing a new gear or motor, place some lubricant from the old gear on the teeth of the new part. Arm Replacement 1.
FCC IC PRECAUTIONS ISED RSS WARNING This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.
STATEMENTS: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired changes or modifications not expressly approved by the party responsible for compliance and could void the user’s authority to operate the equipment.
