Specifications

Unroll the sails on your work table. The larger sail is

the mainsail and the smaller one is the jib.

Lay out the mast on your work table. You will notice

there are two sections of mast (upper and lower),

along with pre-attached and labeled lines.

Slip the mast joiner into the lower mast. If you feel you have no

need to break down the mast, you can epoxy the halves together;

just remember you are not going to be able to take it back apart.

Place the lower mast into the mast pocket on the top deck

of the hull. You might want to lean the mast against a wall

or have somebody help you stabilize it as you work.