Operation Manual

Electrical Installations
07-5
Programming settings
Theprogrammingmenuallowsthefollowing:settingthetime;
correcting the voltages of the consumer and ancillary batte
-
ries, and adjusting inside and outside temperatures.
− PressButton1)formorethan2sectoaccessthepro
-
gramming menu.
− PressButton1)toselecttherelevantparameter.
− PressButton2)or3)(arrowbuttons)toaltertheparame
-
ters.
− PressButton1)repeatedlytosavethechangesandto
exit the main menu.
− Toexitthemainmenuwithoutsavinganychangeswait
for 20 sec without pressing any of the buttons.
Functions
Protection against total discharge
An electronic installation turns off all 12V consumers when the
consumer battery reaches a minimum voltage of 10V. The con
-
sumers can be switched on again for approx. one minute by
switching the main switch on again.
The refrigerator, electric entrance step and those consumers
directly supplied by B2 are not affected by this installation.
10A Sicherung für die Versor-
gung der Wasserpumpe, sie
hängt vom