Operation Manual

5. Exterior structure
34
Stable entry door
The upper
l
and lower
k
parts of the entry door can be opened
and closed separately by opening the door and then unlocking the
upper part
l
of the door from the lower part.
Locking the upper part of the door
• Turn the lever
m
90° to the right and back into an upright posi-
tion to connect the upper and lower parts of the door.
• To close the whole door, use the handle to press it into the
frame
j
.
3
2
1
5 6
4
Never close the upper part of the door if the insect
screen is closed. The insect screen must always be
open when you lock the door.
Unlocking the upper part of the door
• Turn the lever
m
90° to the left and place it in a horizontal po-
sition to separate the upper and lower parts of the door.
• Open the upper part of the door completely and press it
against the outer wall of the vehicle. The door catch
n
will
snap into its counterpart
o
on the outer wall of the vehicle
and prevent the upper part of thedoor from shutting inad-
vertently.
• The door frame and the lower part of the door can now be
swung back separately from the upper part of the door and
leaned against the outer wall of the vehicle.
Stable entry door
Mechanism for stable entry door
Outside door retainer