Operation Manual

5. Exterior structure
35
To open
Unlatch the lock with the key.
Hold the locking knob between your thumb and index nger
and press rmly.
Open the ap downward.
To close
Close the ap upward.
Press the ap on the upper left and right-hand corners to ensu-
re that all of the locks actually click into place.
Latch the lock with the key.
Service ap
Entry step tread
When entering and exiting the vehicle:
Place step tread in front of the entry door to the caravan.
Ensure that the step tread is placed on a level surface; this
prevents the step tread from falling over.
1
2
Pull the plissé
k
and the insect screen
j
on the
entry door to the desired position. To open, carefully
guide the rail back to the original position in order to
fold the plissés correctly.
Note the varied tread heights and, when exiting, en-
sure you will step onto rm and even ground.
All of the fastenings on the service ap must lock into
place when closing to ensure that the ap will always
be closed tight. If the ap is not closed correctly, it
could become permanently deformed, especially
when the caravan stands unused for a longer period
of time.
Spray the sealing gaskets of the service aps regu-
larly with silicon to ensure that they will always move
easily and operate reliably.
Plissé and the insect screen
Entry step tread
Service ap
Opening and closing the service ap