Operation Manual

5. Exterior structure

5.6 Roof awning

Appropriate adapters and tting components are available for sub-

sequent assembly of roof awnings. Please speak to your HOBBY

dealer.

The roof awning should always be assembled by an authorised

specialist.

The maximum permissible total width and total height may not be

exceeded by installing an awning.

Installing an awning may have a negative inuence on

the trailer/driving performance of the caravan.

Read the operating instructions from the manufac-

turer carefully.

Alternatively, a rear-mounted bicycle carrier may be selected

(except in the Premium and Landhaus models).

The driving performance of the camper changes considerably when

there are bicycles on the carrier. The speed should be adjusted to

these circumstances:

Rear-mounted bicycle carrier

If the rear-mounted bicycle carrier is not required, it must be folded up

and secured. To do this, use the clip

and the separate fastenings

included in the accessory kit.

When driving with bicycles, the bicycle carrier must be unfolded and

the straps

must be rmly lashed. The front and back wheels of

each bicycle must be rmly lashed using the straps

. The fasten-

ings included in the accessory kit are used for the frame.

open

closed

• Ensure that full use is made of the permissible drawbar load and

corrected accordingly when there are bicycles on the carrier.

• The critical speed sinks drastically even if the carrier has been

optimally loaded.

• The driver of the vehicle is responsible for ensuring that bicycles

have been fastened securely. The loading system must be folded

up and secured by means of the clips at hand even if nothing has

been loaded.

• Ensure that the load does not partially or fully cover existing illu-

mination devices.

The maximum permissible load for the bicycle carrier

is 30 kg.

Mounting the roof awning (sectional view)

Roof awning