Operation Manual
6. Interior structure
44
Hanging table
To lower
•
Raise the front end of the table top by approx. 30°.
• Pull down the lower part of the table leg
j
, fold it over by 90°
and lay it alongside.
• Fold out the supporting legs
k
by 90°.
•
Pull the table top out of the upper wall brackets
l
.
• Raise the front end of the table top considerably and hook it
diagonally from above into the lower wall brackets
m
.
• Place the supporting legs at the front edge of the table top on
the oor.
Swivelling table
To lower
• Pull upwards on the bow handle
j
on the right-hand side.
• Swivel the table top downwards towards the centre of the vehicle
until the handle locks into place.
To turn
• There are rollers on the table legs, shifted 45°, which enable the
table to be turned around its centre point in any desired direction.
1
Swivelling table
Bow handle for swivelling table
1
3
2
4
Hanging table
Supporting legs
Lowered hanging table
The swivelling table is not fastened to the oor. Before
driving, lower the table and, depending on the model,
secure it with one or two pushbuttons to the seating
arrangement or the front/rear wall.
Securing the table