Operation Manual

6. Interior structure
46
In some models, the narrow section of the seating arrangement can
be widened into a bed.
Bed expansion in the seating arrangement*
(or model-specic)
Conversion
• Press the pushlock
j
to unlock the ap.
• Lay ap
l
fully on the oor in order to raise ap
k
.
• Place ap
l
under the stop on ap
k
and hook into place.
1
2
3
Carry out this procedure in reverse order to convert the bed back
into the seating arrangement.
When driving, push the bed expansion back into place
and use the pushlock to lock it.
Pushlock safety catch
Widening the seating bench
The upper fold-away bed can hold a maximum load of
50 kg.
While driving, the fold-away bed must always be folded
up and locked into place.
Fold-away bed, centre seating arrangement*
We recommend always using two people to fold the
bed in or out.
Fold-away bed above the centre seating
arrangement
To make the centre seating arrangement more comfortable, fold in
the fold-away bed before sitting down.
To convert into a bed
• Release the locks
j
on the left and right-hand side of the fold-
away bed.
• Using two people, slowly lower the fold-away bed to the sup-
ports
k
and fold it out into a bed.
• Set up the safety panel
l
to protect the person sleeping from
falling out.
• Insert the second mattress.
• Hang the ladder (stored in the clothes cupboard when the cam-
per is delivered) in the handle
m
and ensure that the ladder
stands rmly.
To convert back
• Remove the ladder
m
and store it securely.
• Place the mattresses on top of each other.
• Fold down the safety panel
l
.
• Fold up the fold-away bed and push it upwards.
• Shut the locks
j
.
Fold-away bed, open
Fold-away bed, closed
1
2
3
4