Operation Manual
55
7. Installation of electrical devices
Functions of the main switch
• Afterinitiallyconnectingthecaravantothe230Vmains,youmust
press either the main switch or any other control key in order to
activateallofthe12Velectricaldevicesandthe230Velectrical
devicesthatareswitchedbythesystem(e.g.therme,oorhea-
ting*).
• Oncethesystemisinoperation,pressthemainswitchbrieyto
turnallofthelightso.Allofthe12Vsteadyelectricaldevices(e.g.
watersupply,refrigeratorcontrol,heatblower)remainactivated.
The devices that were previously switched on are stored in the
system; pressing on the main switch reactivates them. This also
resets the degree to which those lights were dimmed that can be
regulated.
• Pressingthemainswitchforatleastfoursecondswhilethesys-
temisswitchedonwillturnonotonlythepresentlyactivated
devices,butalsotheentire12Vsystem(alsoaectsushingthe
toiletandwaterpump;inself-sucientcampers,thiswillnotcut
othechargingofthebattery)
• If there should be a power failure, the system will remember
whetherthemain switchwason oro.As soonasthe power
is back on, the main switch will automatically switch itself back
on. Electrical devices that continuously use current, such as the
heating, will then begin to operate again.
If the selector switch of the Dometic refrigerator has
beensetto12V,therefrigeratorwilloperateautomati-
callyon12Vwhentheignitionofthebasevehiclehas
been switched on, i.e. it is not necessary to press the
main switch.
All other 12 V electrical devices will only operate
on the battery of the base vehicle if they have been
centrally activitated using the main switch on the
control panel.
12
TFT control panel
(Premium/Landhaus models or optional extra)
Wall light/lighting in the seating arrangement
Ceiling light
Kitchen lighting
Outer tent light
Therme / boiler
Lighting Ambience 1
Lighting Ambience 2
Lighting Ambience3
Memory
Floor heating*
Main switch
TFT display: see p. 56
Control knob
Soft keys
1
2
3
4
5
6
7
8
9
10
12
13
14
15
10
432
7
1
6 8 9
5
12
14
13
15