Operation Manual

66
7. Installation of electrical devices
Info menu on the TFT control panel
Information on the device manufacturer is shown here.
12:30 23,5 °C
09.01.15
18,0 °C
HOBBY
Hobby-Wohnwagenwerk
Ing. Harald Striewski GmbH
Harald-Striewski-Strasse 15
24787 Fockbek
Deutschland
14:00 -------
01.07.15
-------
01.07.15
14:00
- - - - - - - - - -
Settings menu (for data in the xed header A)
The date and time can be set in the Settings menu. Use the control
knobortheleftandrightarrowstoreachthedesiredvalue.Pressthe
control knob; it is then possible to change the values by turning the
knob(right=increasevalue;left=decreasevalue)orbyusing the
“+/-”function.Pressthecontrolknobtoconrmthechangedvalue.
Only then will it be saved.
It is also possible to calibrate the indoor and outdoor temperatures
shown,astemperatureeectsonthesensorsmayleadtoadeviati-
on between the temperature displayed and the actual temperature.
Thetemperaturedisplaycanbechangedbyamaximumof+/-12°C.
Exitthismenuby usingthe“Back”function; otherwise,afterone
minute, it will automatically switch back to the main menu on the
control panel.
Einstellungsmenü
Datum
Uhrzeit
Temperaturoset
Wecker on/o
09.01.15
12:30
- 2 °C
+ 1 °C
14:00 -------
01.07.15
-------
Displaying the data in the xed header A
ThismenugivesanoverviewofthedatainthexedheaderA.It
isonlypossibletoexitthismenubyusingthe“Back”function;it
does not automatically switch back to the main menu on the control
panel.