Operation Manual
67
7. Installation of electrical devices
WLAN-Module *
Hobby's CI-Bus board management can link together up to 15 de-
vices, enabling you to operate them using just one central control
panel that shows their functions on its display. (standard)
When coupled to a WiFi module, all of the functions on the TFT con-
trol panel can be wirelessly controlled via your smartphone, tablet or
notebook.
The SD card is also found on the WLAN module. The
devices are updated on this card. This SD card cannot
bewritteninWindowsleformat.
After the main switch on the control panel has been switched on and
all of the connections have been correctly attached, a WLAN network
is set up that is recognized by all WLAN-enabled devices.
The WiFi must be activated in the submenu so that a connection can
be set up.
Use the “On/O” function to start the WiFi or shut it down. The WiFi
icon turns orange while the program is starting up or shutting down.
The WiFi is ready for operation as soon as the icon turns green.
The connection data for the WiFi network and the web server can be
seeninthesubmenu.(Themenubelowonlyshowsexampledata.)
The device that is to be connected to the network must be connected
via the menu WiFi Settings with the network “meinhobby1” (in this
example).Thepassword(inthisexample)isalso“meinhobby1”.
Use the Search/Scan function rst if the network is not displayed
immediately.
When the device has been connected to the network, call up the URL
http://192.168.0.1 in the Internet browser.
To open the data in the web browser, enter the user name “hobby”
and the password “caravan”(inthisexample).Thepageforopera-
ting the devices and switching on the lights will then be displayed.
Lichtsystem
09.01.2015
17:00 to 22:00
13:12 -------
20.08.15
-------
14:00 -------
01.07.15
-------
Einstellungsmenü
Datum
Uhrzeit
Temperaturoset
Wecker on/o
WLAN SSID:
meinhobby1
14:00 -------
01.07.15
-------
WLAN Password:
meinhobby1
Web I f Username:
hobby
Web I f Password:
caravan
Main menu on control panel
Submenu