Operation Manual

69
7. Installation of electrical devices
General information regarding the TFT display
The time and date are buered by a 3V 210 mAh, CR2032 type
button cell. If, therefore, the time should be incorrect or the clock
should stop working, this button cell must be replaced. It is moun-
ted on the reverse of the circuit board of the TFT display. To replace
this button cell, the TFT display must be removed from the furniture
front by carefully clipping the chrome-plated frame out of its holder.
You will then see the screws that fasten the plastic part to the furni-
ture. Loosen these screws to detach the display.
When replacing the button cell, please ensure that
plus and minus are in the right direction. Incorrect
polarity may cause the display to become defect.
7.3 Electrical supply
Electricity for the caravan can be obtained from the following
connections:
- 230Vmainsconnection50Hz
- viathebasevehicleifitisconnectedusingthe13-poleplug
(limitedfunctions)
- viaabuilt-inauxiliarybattery*.Everythingthatuses12V,such
as lighting, water supply, etc., is available.
Supply via mains connection
Thecaravanreceivesitselectricpowersupplyviathe230VCEE
feeder plug on the side wall of the vehicle.
1
Circuit board (reverse side)
of TFT display
CEE external socket