Operation Manual

8. Water
83
8.3 Toilette
Preparing the excrement tank
Before you can use the toilet, you must rst prepare the excrement
tank. How to do this is shown in Figures 1 to 11 on the left.
Preparing the ushing water
(model-specic)
The next step is to prepare the ushing water tank as shown in
Figures 12 to 20.
Check the emptying hose or the lling level indicator on the adju-
sting knob (C-500 only) to determine how much water is in the tank.
1 2 3
4 5 6
7 8 9
10
11
12 13 14
15
16 17
18 19
20
Never add sanitary liquids directly through the valve
or into the toilet bowl, because this may damage the
washer
of the valve in the excrement tank.
Always add liquids through the empty-ing support
(Fig. 6)
We recommend that you press the ventilation button
(Fig. 10) before putting the excrement tank back into
its correct position.
To avoid water damage in your caravan, ensure that
you are not travelling with a ushing water tank that is
too full (Fig. 16).
Using the toilet
The toilet can be used when the valve is either open or closed. To
open the valve, turn the control knob counter-clockwise or push
the lever to the left (depending on your model).
Flush the toilet by pressing the ush knob for several seconds. Shut
the valve every time you have nished using the toilet.
Never leave any water in the bowl when the toilet is
not being used.
This prevents unpleasant odours.