Operation Manual

10. Built-in devices
95
Modes of operation
• LPG operation
• Heating cartridge operation (230 V)
• Combined LPG and heating cartridge operation
Function modes
• Water heating
• Heating and water heating
• Heating
Operating device
When in the idle position, the device shows which heating func-
tions have been activated; the background lighting of the display
is o.
After two minutes, the operating device automatically switches
from the set position to the idle position if no button has been
pressed or if the idle position has been set using the arrows.
For further detailed information on operation, hand-
ling and maintaining the hot-water heating system,
please refer to the separate operating instructions for
“Alde Compact 3020”.
If the vehicle is equipped with a TFT control panel,
the basic functions of the hot water heating system
can be controlled using the panel next to the entran-
ce (see p. 61).
To start the hot water heater
To start the heating system, press the On/O button and the start
image will appear. The heater will start with the settings that were
last used.
Check the amount of liquid in the expansion tank at
regular intervals. When the heating is o, the liquid
should be approx. 1 cm above the "Min" mark.
Control panel for the hot water heating
system