Operation Manual

Built-in devices
10-11
Setting the desired temperature
(+5°C to +30°C)
by pressing – or + in steps of 0.5°C.
Hot water (50°C) is always available when this is switched on.
The hot-water system is operated electrically or uses LPG.
Setting the hot water
Should you require more hot water, the temperature can be
increased temporarily from 50°C to 65°C. After 30 minutes,
the hot-water heater will switch back to normal operation.
Increase the amount by pressing +; turn the hot water off by
pressing -.
Setting the electric heating system
Use the – and + buttons to select the output (Off, 1/2/3 kW).
Preference is given to electrical operation when selecting
whether to operate on electricity or gas.
Setting for heating with gas
Set the heating to gas operation. Start operation with gas
by pressing the On button. The heating system will operate
until the temperature you have set has been reached. Turn
gas operation off by pressing the Off button.