Operation Manual
Built-in devices
10-9
Service menu
Show the version number of the
heating or control panel.
To show the version number of the connected devices
Setting the time
- The hours blink.
- Use the adjusting knob / push-
button to set the hours (24-hour
mode).
- After pressing the adjusting knob
/ pushbutton once again, the
minutes will blink.
- Press the adjusting knob / push-
button to conrm the time entered.
Activating the timer (ON)
- Use the adjusting knob / pushbut-
ton to activate the timer (ON).
- Press the adjusting knob / push-
button to conrm the time entered.
The timer will continue to remain active, even for several
days, until it has been deactivated (OFF).
The icon for the timer will blink when the timer has been
programmed and is active.
Deactivating the timer (OFF)
- Press to switch to the setting
mode.
- Use the adjusting knob / pushbut-
ton to deactivate the timer (OFF).
- Press the adjusting knob / push-
button to conrm the time entered.