Operation Manual

Interior Structure

06-21

The following conditions apply when using the seats

while driving:

• Push both seats back to the rear position so that the

backrest lies against the belt rack.

• The inner seat must be pushed in completely so that it

is against the side of the outer seat.

• The seatbelt buckles

must be positioned on the

outside, next to the seats, and not led between the

backrest and the seat.

• The tabs

to which the ends of the seatbelts have

been sewn must be adjusted so that the seatbelts point

towards the rear and the screws towards the front (see

pictogram

in the middle behind the seats).

Adjusting the backrest

• Push on the handle

Pushing the seat to the side

• Push on the lever

Pushing the seat forwards or backwards

• Push on the lever on the front edge of the seat.