User Manual

Power Microwave
TXPA12006W-1.2GHz Transmitter Signal Booster
Introduction
The TXPA12006W-1.2GHz Transmitter Signal Booster is a highly efficient and compact
unit designed to increase the performance and range of the transmitter work in the
1.2GHz ISM band.Such as 1.2GHz wireless AV transmitter, Remote controler,baby
monitor, wireless camera , wireless audio, wireless earphone. Using this product can be
the wireless signal coverage increased to more than double in the visible range. Can
enhance the signal to prevent interference. Can be used with all kinds of antenna.
Specifications
Model Number
TXPA12006W
Limit Input power
1000mW
Frequency Band
950MHz-1400MHz
Power Supply Voltage
12-16V
Cooling mode
active magnetic fan
Lithium battery
3S 4S
Weight
≈50 g
Power dissipation
≈20W
Box Size
10x10x4 cm
Battery life reference(input 600mW)
Output connector
SMA-K
3S 2200mAh
≈30 minutes
input connector
SMA-J
4S 5200mAh
≈90 minutes
Gain
10 dB
Temperature
< 80℃
MAX Output power
6000 mW
RED LED
Booster Running
Quick Install Guide
STEP 1:Turn off the power supply of the Transmitter, take down the antenna of the Transmitter.
STEP 2:The booster input port connection with the output port of the transmitter.
STEP 3:Reconnect the antenna to the booster.
STEP 4:Connect the power supply. The red LED lights means the booster to work.
Connection diagram
ACUTION DANGER!
 Turn off the power supply before remove or replace the antenna.
 Please ensure good heat dissipation.
 Not lightning protection ! Not waterproof !
 Non professional modification may be damage the device !
 Please observe the local electromagnetic radiation regulations, Our company is not liable
for any resulting liability.