User Manual

ASSEMBLY OF MAIN WINGS,

PROPELLER:

FRONT LANDING GEAR AND

Install the control leveling aileron. horns of

aileron. (1.2X65mm 2pcs)

(PA1.7X15mm 8 pcs)

Install the steel wire with the second hole on servo arm, close the chuck after.

Put reinforcing rod into the holes on left and right wing with two ends. Then

fasten reinforcing rod with screws.

Connect two steering devices with Y wire. Install the main wing and cabin with screws. The Y wire

will reach equipment bay after (PM3.0X35mm 2pcs) through the hole on cockpit.

Put inclined strut into Fix front landing gear

the right hole on with steel wire. main wing.