User Manual

Tighten diagonal draw bar and dam-board with screws. (PA2.6X20mm)

Fix the horizontal wing and vertical wing with stree wire.

(Spring: 0.5X4X24.1mm 8pcs) (For horizontal 1.0X94mm 2pcs For vertical 1.0*94mm 2 pcs)

Fix propeller into the spindle of motor. Then tighten it up with spacer and screw.

CENTER OF GRAVITY

PRE-FLIGHT CHECK

1. Check wings and control surfaces for alignment and damage. Check all connections for control

services. Check all screws and glued surfaces.

2. Check the propeller, adaptor and undercarriage.

3. Check the H-King Navy Cub’s Centre of Gravity. (CoG)

4. Always turn your transmitter on before powering your RC plane.