User Manual

ManualsBrandsHobbyKing ManualsHobbyBoat ESC Programming Card

第 - 1 - 页共 7 页

Manual for brushless motor electronic speed control

(used for ship)

Dear user,

Thanks for purchasing brushless electronic speed controller(ESC) which designed and manufactured by

Hobbyking.Improper operation may cause personal injury and equipment damage. High power system for RC model is

dangerous,strongly suggest users read the instruction carefully . We won’t assume any responsibility for personal

injury ,property damage or consequential damages resulting from our product or our workmanship.

I. Main features:

●Applies to multiple kinds of three-phase brushless motor in the drive market.

●Can operate normally without special setting.

●Motor operating parameters can be set by remote control or programming card with voice prompts, very simple and

convenient.

●With multiple self-protection function: battery over low voltage, over thermal, throttle lost, motor blocked etc.

●Auto entrance angle , automatically adapt to various types of high-speed motor.

●Have a smooth, delicate feel of speed controlling, top-ranking of speed linear. the end of throttle can automatically

correct.

●Battery cells can be automatic judged

●High quality components and water cooling system ensure that ESC expresses the strong capacity of resistance of

flow (current overcurrent).

II.First start setting

Warning: please set up the boat model before using , to make sure the quant won’t encounter people or objects, and

avoid occurring safety accidence！

1. Connect the wire as the graphical representation, enter 2.

Summary of content (7 pages)

PAGE 1
Manual for brushless motor electronic speed control (used for ship) Dear user, Thanks for purchasing brushless electronic speed controller(ESC) which designed and manufactured by Hobbyking.Improper operation may cause personal injury and equipment damage. High power system for RC model is dangerous,strongly suggest users read the instruction carefully . We won’t assume any responsibility for personal injury ,property damage or consequential damages resulting from our product or our workmanship.
PAGE 2
. Set throttle trip Firstly, the user must understand the performance of the remote control , the range and direction of throttle control. what’s your purposes for the model you are handling. For different purpose it has different setting for the model. Set throttle with gun-type remote control Cut off the main power supply of ESC, turn on the power supply of transmitter and receiver.
PAGE 3
：If losing the signal of receiver during the operation, the output of motor will be cut off in 1S and makes sound of BEEP “∮__”with interval 1S. ( but PCM receiver lose the signal of transmitter , it will keep the normal control signal, ESC won’t provide the sound through motor at this time.) ※ For gun-type remote control and panel-type remote control , ESC support the set of half throttle trip .It can set the Maximum –Minimum. The maximum – every position where between middle throttle and the Max position.
PAGE 4
the Max in the forward direction. When making 1 sound “∮_”, shows this sub option has set successfully. Keep the throttle in the Max position and back to the main option. *5 Set 1~6 options as this procedure. *6 Push the throttle to the minimum (the Maximum of the reverse direction). Back to the middle after the short sound. Note: “*2”in “》4”, when hearing the third sound, please push the rocker to the lowest throttle. The parameter of ESC will restore factory default.
PAGE 5
Use programming card Use programming card to set the ESC is the most ideal and convenient choice, only insert the signal line of ESC into the programming card, select the item you want to change (see table above),press [OK] ,VALUE window displays "S. (To restore the last option press the [RESET] then click [OK] ). Setting (programming) item description and term explanation ★ 1 Operation mode Forward with brake: can only move forward, when throttle reverse, it is brake. without reversing.
PAGE 6
4 kinds of options: 25%, 50%, 75%, 100%, different option has different reverse force, it is recommended to use a less option, to avoid collision because the strength is too big to control hard when reversing.
PAGE 7
Failure phenomenon when power on, motor does not work,come with “BEEP--,BEEP--”warning sounds.(（Each group of dual sounds' time interval is 1second) increase the throttle of remote control in the forward direction,Ship move in the opposite direction Motor suddenly stopped in the process of running When motor startup quickly increase the throttle ， motor come with the problem like Stick or pause Possible reason The battery packs' voltage is not in the normal range 1.