3CH Receiver Customized Manual Wednesday, July 9th, 2014 by V_Kingo
Receiver Parameters Channels: 3 Channels Model Type: Car/ Boat/ Plane RF Receiver Sensitivity: -105dbm Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Power: 6VDC (1.5V*4) Weight: 395g ANT Length: 26mm Size: L37.6 x W22.3 x H13mm Color: Black Certificate: CE(0678) FCC Recommended installation Place the antenna of the receiver vertically with the plane, and don’t install it close to the metal parts for assuring its sensitivity (See Figure 1).
Binding process 1. Insert the binding loop to the channel BIND / CH3 port of the receiver. 2. Connect the receiver battery to BAT pins of the receiver, LED is flashing and this means the receiver is in binding status. 4. Press and hold the binding button on the rear of transmitter, and then switch on the power supply. 5. Observe the LED on the receiver, if the LED stops flashing and remains on, this means successful bind. (This process will take about 5 seconds). 6.
Fail Safe Function (Only for CH2) Function Failsafe is a useful feature in which CH2 controls moves to a preset position whenever the control signal is lost for a period of time. Setting 1. Turn on the Transmitter switch. 2. Turn on the Receiver switch, the LED will be on. 3. Adjust Transmitter’s CH2 to desired position. 4. Press the “Setting” button on Receiver, the LED will flash, and then stop after 3 seconds, which means setting finished. Testing 1. Turn on the Transmitter switch. 2.