User Manual

RTF/BNF
EN
23
Appendix
Optional First Person View
(FPV) Installation
Visit the Champ S+ page at www.hobbyzonerc.
com for information about the optional FPV system
(sold separately).
FPV compatible systems for this aircraft.
- SPMVS2500 - Camera and Teleporter V4
headset bundle
or
- SPMVA2500 - 25mW FPV Micro camera
- SPMVR1100 - Teleporter V4
or
- SPMVM430 - Spektrum Monitor
Consult local laws and ordinances before
operating FPV (fi rst person view) equipment. In
some areas, FPV operation may be limited or
prohibited.
IMPORTANT: You are responsible for operating this
product in a legal and responsible manner.
FPV Camera Installation
Refer to the Spektrum
™
FPV System instructions for
set up and operation.
1. Remove the decal on the top of the fuselage to
expose the FPV power connector.
2. Carefully pull the FPV power connector out
of the hole.
3. Align the red and black wire colors and connect
the FPV power connector to the camera unit.
4. Ensure the camera points directly forward.
Secure the camera unit on the wing using
double-stick tape.
5. Put excess wire in the hole. If desired, cover the
hole with clear tape.
6. Connect a fl ight battery to the aircraft, remove
lens cap and test the FPV system.
2
3
5
4
6